CUPAL® copper-aluminium bimetalsheet, washers and parts to your drawing
Cu/Al transitions for busbars, cable lugs and earthing, without galvanic corrosion. Stock sheet and washers, or drilled and cut parts made to your drawing, with an EN 10204 certificate.
- Sourced from c:met GmbH, Germany
- Quote within 24 hours
- From one 500 × 500 mm sheet
Describe briefly what CUPAL material you need:
Drag and drop files here
Up to 10 files · 4 MB total
We reply within 24 hours on working days
cu-al.eu is the dedicated CUPAL® line of HIDRA-MIX Kft.hidramix.eu →Our Products
CUPAL from stock or to your drawing
How to order in 4 steps
Tell us what you need
By email, phone or the form, give us size, thickness and quantity. Attach a drawing (DXF, PDF) if you have one.
Quote within 24 hours
On working days you get the price and the delivery date within 24 hours.
Made to your drawing
Discs, strips, rectangles, drilled plates or any contour. Our laser-cutting partner cuts complex contours, and long runs can be punched. Production takes 5–10 working days.
Delivered across the EU
Stock items arrive 2–10 working days after the order. A custom order takes 2–4 weeks door to door within the EU, or you can collect it in Budapest.
Tell us what you need
By email, phone or the form, give us size, thickness and quantity. Attach a drawing (DXF, PDF) if you have one.
Quote within 24 hours
On working days you get the price and the delivery date within 24 hours.
Made to your drawing
Discs, strips, rectangles, drilled plates or any contour. Our laser-cutting partner cuts complex contours, and long runs can be punched. Production takes 5–10 working days.
Delivered across the EU
Stock items arrive 2–10 working days after the order. A custom order takes 2–4 weeks door to door within the EU, or you can collect it in Budapest.
What is CUPAL?
CUPAL is a cold-roll-bonded copper-aluminium bimetal: an aluminium sheet with a copper layer bonded to one face by rolling and diffusion welding. By layer thickness it is 70% aluminium and 30% copper. It is not an alloy, and each layer keeps its own properties. You need it wherever an aluminium and a copper conductor meet in a bolted joint and galvanic corrosion must be prevented.
Know what you need?
The request takes 2 minutes; on working days the price follows within 24 hours.
Applications
Where CUPAL is used
Wherever a copper and an aluminium conductor meet in a bolted joint: from switchgear and busbars to sailboat masts.
Switchgear
Copper cable lugs on aluminium busbars, without corrosion
Busbars
Transition plates for copper-aluminium busbar joints that do not corrode
Cable lugs
Copper lug on an aluminium bar, or the reverse. CUPAL washer or bimetal lug?
Marine and masts
Copper cable to an aluminium mast or deck fitting
Transformer terminals
Copper cable or bar on the aluminium terminals of dry-type (cast-resin) transformers
Renewable energy
PV, battery storage (BESS) and EV chargers, with Cu/Al joints free of galvanic corrosion
Lightning protection
Aluminium and copper down-conductors and earthing. Outdoor joints need the cut edge protected; ask us.
— Standards and certificates
DIN 17007, DIN 1787, ISO 9001
Al 3.0255 and Cu 2.0065 Werkstoff numbers, EN 10204 certificate, ISO 9001:2015 certified supplier (c:met GmbH).
View details— Shipping
Stock in 2–10 working days, custom production 5–10
Stock items reach you 2–10 working days after the order. Custom production takes 5–10 working days; door to door within the EU, allow 2–4 weeks.
View detailsKnowledge base: CUPAL technical articles
10/26/2026
Laser cutting or punching? Custom CUPAL parts from a drawing: which process pays off when
A custom copper-aluminium part can be cut from CUPAL sheet in three ways: on a shear, by laser or with a punching tool. What decides between them, what is different with a bimetal, and what to put in your quote request to get an accurate price first time.
Read the full article →9/8/2026
Transition washer: toothed or bimetallic? How to tell which one your drawing means
Two physically different parts are sold as a transition washer: a toothed copper-alloy washer and a roll-bonded copper-aluminium bimetal disc. How to tell them apart, which suits which joint, and the 11 bimetal sizes from M6 to M20.
Read the full article →9/8/2026
Connecting copper to aluminium: which part for which joint
Bimetal lug, Al/Cu splice, bimetallic washer or cut plate: which copper-to-aluminium connector fits each of five joints, in what size, with SKUs.
Read the full article →Frequently asked questions about CUPAL
Questions, or ready to order?
Quote within 24 hours on working days. Email, call or use the form.
Or talk to us directly:



